Influence of the extraction mode on the yield of some furanocoumarins from Pastinaca sativa fruits

Analysis of plant material is an important task in chemotaxonomical investigations, in search of plants with pharmacological activity or in standardisation of plant drugs. The choice of optimal conditions for the analysis of plant material and effect of extraction method on the yield of furanocoumarins from Pastinaca sativa fruits were examined. The following extraction methods were used in experiments: exhaustive extraction in Soxhlet apparatus, ultrasonification (USAE) at 25 and 60 degrees C, microwave-assisted solvent extraction in open and closed system (MASE) and accelerated solvent extraction (ASE). In most cases, the yield of furanocoumarins was highest by use of ASE method as well as by ultrasonification at 60 degrees C.     

Direct separation, identification and quantification of epimers 22R and 22S of budesonide by capillary gas chromatography on a short analytical column with Rtx-5 stationary phase

The conditions for separation, identification and quantitative determination of epimers 22R and 22S of budesonide by capillary gas chromatography (GC) with FID detection and two various sample injection methods, namely split-splitless and cool on-column, were established. In analysis helium as carrier gas and Rtx-5 capillary column of 7 m in length along with stationary phase Crossbond 5% diphenyl-95% dimethyl polysiloxane were used. The individual epimers were identified under specified conditions by using standard samples of different declared concentration of each epimer under investigation: (1) 51.2% of epimer 22R and 47.3% of epimer 22S, and (2) 95.1% of 22R and 4.4% of 22S, as well as Pulmicort, a preparation containing micronized budesonide as an active substance. It seems that good parameters of preliminary validation achieved by the proposed methods can confirm its suitability for quantitative analysis purpose. The retention times obtained for epimers 22R and 22S, depending on injection technique are about 7.7 and. 8.3 min for split and, approx. 10.3 and 10.9 min for cool on-column. The limits of detection and quantitation are 5.7 and 6.2 ng, for 22R respectively, and 4.3 and 4.8 ng for 22S. The linearity is maintained for concentrations ranging from 0.01 to 0.20 mg/ml. The quantitative analysis features of repeatability, high precision and accuracy confirmed by the obtained results and its statistical evaluation.     

Differential phosphoproteome profiling by affinity capture and tandem matrix-assisted laser desorption/ionization mass spectrometry

Protein phosphorylation is a ubiquitous post-translational modification that affects a significant subset of the proteome and plays an especially important role in signal transduction and cell cycle control in eukaryotic organisms. Recently developed methods that couple multidimensional liquid chromatography to electrospray mass spectrometers can be used to analyze entire phosphoproteomes. However, they require considerable investments and technical skills that are only available in a few highly specialized laboratories. These methods also appear to be biased. Statistical analyses show that peptides from abundant proteins and multiply phosphorylated peptides are disproportionately identified. We describe an economic alternative that utilizes a phospho-affinity step to isolate the intact phosphoproteins. These are subsequently characterized by electrophoresis and identified by direct de novo sequencing using tandem mass spectrometry. We applied this technique to probe signal-induced changes in the phosphoproteome of human U937 cells, and found that the pools of two cancer-related phosphoproteins implicated in intracellular hormones signaling are dramatically altered in the course of monocyte to macrophage differentiation.     

Closure of rRNA related gaps in the Chromobacterium violaceum genome with the PCR-assisted contig extension (PACE) protocol

In the finishing phase of the Chromobacterium violaceum genome project, the shotgun sequences were assembled into 57 contigs that were then organized into 19 scaffolds, using the information from shotgun and cosmid clones. Among the 38 ends resulting from the 19 scaffolds, 10 ended with sequences corresponding to rRNA genes (seven ended with the 5S rRNA gene and three ended with the 16S rRNA gene). The 28 non-ribosomal ends were extended using the PCR-assisted contig extension (PACE) methodology, which immediately closed 15 real gaps. We then applied PACE to the 16S rRNA gene containing ends, resulting in eight different sequences that were correctly assembled within the C. violaceum genome by combinatory PCR strategy, with primers derived from the non-repetitive genomic region flanking the 16S and 5S rRNA gene. An oriented combinatory PCR was used to correctly position the two versions (copy A and copy B, which differ by the presence or absence of a 100-bp insert); it revealed six copies corresponding to copy A, and two to copy B. We estimate that the use of PACE, followed by combinatory PCR, accelerated the finishing phase of the C. violaceum genome project by at least 40%.     

Genetic characterization of staphopain genes in Staphylococcus aureus

Staphylococcus aureus , a leading cause of bacterial infections in humans, is endowed with a wealth of virulence factors that contribute to the disease process. Several extracellular proteolytic enzymes, including cysteine proteinases referred to as the staphopains (staphopain A, encoded by the scpA gene, and staphopain B, encoded by sspB ), have proposed roles for staphylococcal virulence. Here we present data regarding the distribution, copy number and genetic variability of the genes encoding the staphopains in a large number of S. aureus strains. The polymorphism of the scpA and sspB genes in three laboratory strains and 126 clinical isolates was analyzed by polymerase chain reaction (PCR)-restriction fragment length polymorphism (RFLP). Both genes were detected in all isolates by PCR amplification and, based on the PCR-RFLP patterns, classified as four types for scpA and six types for sspB . Those with the most divergent patterns were subjected to DNA sequencing and compared with genomic sequence data for the seven available strains of S. aureus . Southern blot analysis of the scpA and sspB sequences indicates that they are strongly conserved as single-copy genes in the genome of each S. aureus strain investigated. Taken together, these data suggest that the staphopains have important housekeeping and/or virulence functions, and therefore may constitute an interesting target for the development of therapeutic inhibitors for the treatment of staphylococcal diseases.     

Cathepsin L and Arg/Lys aminopeptidase: a distinct prohormone processing pathway for the biosynthesis of peptide neurotransmitters and hormones

Peptide neurotransmitters and hormones are synthesized as protein precursors that require proteolytic processing to generate smaller, biologically active peptides that are secreted to mediate neurotransmission and hormone actions. Neuropeptides within their precursors are typically flanked by pairs of basic residues, as well as by monobasic residues. In this review, evidence for secretory vesicle cathepsin L and Arg/Lys aminopeptidase as a distinct proteolytic pathway for processing the prohormone proenkephalin is presented. Cleavage of prohormone processing sites by secretory vesicle cathepsin L occurs at the NH2-terminal side of dibasic residues, as well as between the dibasic residues, resulting in peptide intermediates with Arg or Lys extensions at their NH2-termini. A subsequent Arg/Lys aminopeptidase step is then required to remove NH2-terminal basic residues to generate the final enkephalin neuropeptide. The cathepsin L and Arg/Lys aminopeptidase prohormone processing pathway is distinct from the proteolytic pathway mediated by the subtilisin-like prohormone convertases 1/3 and 2 (PC1/3 and PC2) with carboxypeptidase E/H. Differences in specific cleavage sites at paired basic residue sites distinguish these two pathways. These two proteolytic pathways demonstrate the increasing complexity of regulatory mechanisms for the production of peptide neurotransmitters and hormones.     

Molecular Cloning of Silicatein Gene from Marine Sponge <Emphasis Type="Italic">Petrosia ficiformis</Emphasis> (Porifera,Demospongiae) and Development of Primmorphs as a Model for Biosilicification Studies

In some sponges peculiar proteins called silicateins catalyze silica polymerization in ordered structures, and their study is of high interest for possible biotechnological applications in the nanostructure industry. In this work we describe the isolation and the molecular characterization of silicatein from spicules of Petrosia ficiformis, a common Mediterranean sponge, and the development of a cellular model (primmorphs) suitable for in vitro studies of silicatein gene regulation. The spicule of P. ficiformis contains an axial filament composed of 2 insoluble proteins, of 30 and 23 kDa. The 23-kDa protein was characterized, and the full-length cDNA was cloned. The putative amino acid sequence has high homology with previously described silicateins from other sponge species and also is very similar to cathepsins, a cystein protease family. Finally, P. ficiformis primmorphs express the silicatein gene, suggesting that they should be a good model for biosilicification studies.     

Genetic Diversity Between Japanese and Chinese Threeline Grunt (<Emphasis Type="Italic">Parapristipoma trilineatum</Emphasis>) Examined by Microsatellite DNA Markers

Threeline grunt (Parapristipoma trilineatum) distributes around the southwestern coast of Japan and the east coast of China. The Chinese P. trilineatum was imported by Japan as an aquacultural seed because of its rapid growth compared with that of the Japanese P. trilineatum. The Japanese P. trilineatum differs from the Chinese P. trilineatum in some quantitative traits, and it has been suggested that these two P. trilineatum populations are genetically different. In order to identify the population structures around Japan and China, 5 local populations of the Japanese P. trilineatum and 2 local populations of the Chinese P. trilineatum were analyzed using 4 microsatellite DNA markers. Significant differences were detected between Japanese and Chinese P. trilineatum and among samples of Chinese P. trilineatum; however, among the samples of Japanese P. trilineatum, no significant differences were detected. These results suggest that care must be taken to prevent the escape of the Chinese P. trilineatum from culture cages around the Japanese coast, in order to preserve the genetically different population structures of Japanese and Chinese P. trilineatum.     

FAPPs control Golgi-to-cell-surface membrane traffic by binding to ARF and PtdIns(4)P

The molecular mechanisms underlying the formation of carriers trafficking from the Golgi complex to the cell surface are still ill-defined; nevertheless, the involvement of a lipid-based machinery is well established. This includes phosphatidylinositol 4-phosphate (PtdIns(4)P), the precursor for phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P(2)). In yeast, PtdIns(4)P exerts a direct role, however, its mechanism of action and its targets in mammalian cells remain uncharacterized. We have identified two effectors of PtdIns(4)P, the four-phosphate-adaptor protein 1 and 2 (FAPP1 and FAPP2). Both proteins localize to the trans-Golgi network (TGN) on nascent carriers, and interact with PtdIns(4)P and the small GTPase ADP-ribosylation factor (ARF) through their plekstrin homology (PH) domain. Displacement or knockdown of FAPPs inhibits cargo transfer to the plasma membrane. Moreover, overexpression of FAPP-PH impairs carrier fission. Therefore, FAPPs are essential components of a PtdIns(4)P- and ARF-regulated machinery that controls generation of constitutive post-Golgi carriers.